Tag: Instruments
-
The Principle of Operation of an Induction Potentiometer
An induction potentiometer is a rotary type linear-variable inductor with two concentrated windings wound on the stator and on the rotor as illustrated in the figure below: The rotor windings are excited with an AC, inducing voltage in the stator windings. The amplitude of the output is dependent on mutual inductance between the two coils,…
-
Basic Elements of an Electronic Instrument
An electronic instrument is made up of the following key elements: Transducer This is the first sensing element and is needed only when measuring a non-electrical quantity such as pressure or temperature. Its task is to convert the non-electrical physical quantity into an electrical signal. An example of a transducer is a thermocouple for sensing…
-
Electrical vs. Electronic Instruments
Despite the fact that both electrical and electronic instruments measure electrical quantities like voltage and current, they differ from each other in terms of the built-in features; for example, purely electrical instruments don’t possess any in-built amplifying device to increase the amplitude of the quantity being measured whereas electronic instruments typically incorporate an amplifier. DC…
-
How to calibrate a dc voltmeter
An instrument may be calibrated by comparing its reading with that of a more accurate instrument when both are measuring the same quantity. The more accurate instrument is used as a standard for comparison purposes. The figure below illustrates the method for calibrating a dc voltmeter. An appropriate dc voltage level is applied from the…
-
How to calibrate a dc ammeter
The figure below shows two dc ammeters connected in series, so that they are both measuring the same current. An ammeter may be calibrated by comparing it to a more accurate (standard) ammeter measuring the same quantity. The accuracy of the standard instrument should be at least four times better than the instrument to be…
-
Digital vs. Analog Instruments
Electronic instruments mainly voltmeters used either transistor or vacuum tubes. The later one is called The Vacuum Tube Voltmeter (VTVM) and the former one is called the Transistorized Voltmeter (TVM). In almost every field of electronics, VTVMs have been replaced by TVMs because of their numerous advantages. In TVM, due to the absence of a…