Laser diodes are PN junction devices under a forward bias. LASER is an acronym for Light Amplification by Stimulated Emission of Radiation.
The laser diode structure can be divided into two categories:
An example of an edge-emitting laser diode structure is shown in Figure 1.0 below. This type of structure is termed to as Fabry-Perot type laser.

From the figure above, you can clearly see that a PN junction is formed by two layers of doped gallium arsenide (GaAs). The length of the PN junction has a clear-cut relationship with the wavelength of the light to be emitted. As observed in Figure 1.0, there is a highly reflective surface at one end of the junction and a partially reflective surface at the other end. External leads provide the anode and cathode connections
When the PN junction is forward biased by an external voltage source, electrons move across the junction and the typical recombination occurs in the depletion region which results in the production of photons. As forward current is increased, more photons are produced which drift at random in the depletion region. Some of these photons strike the reflective surface perpendicularly. These reflected photons enter the depletion region, strike other atoms and release more photons. All these photons move back and forth between the two reflective surfaces. The photon activity becomes so intense that at some point, a strong beam of laser light comes out of the partially reflective surface of the diode.
The beam of laser light produced by the diode has the following unique features:
Laser diodes have a threshold level of current above which the laser action occurs but below which the laser diode behaves like a LED emitting incoherent light.
Recommended:
Related: Semiconductor Diodes
Image source: Pexels Smart homes are no longer futuristic. They are already here, changing how…
Thyristors are semiconductor devices that tend to stay ‘ON’ once turned ON, and tend to…
Image source: Freepik Introduction: The Evolution of Connectivity Telecommunications have come a long way since…
Modern manufacturing demands smarter heat treatment. Specifically, factories seek greater precision, energy efficiency, and automation.…
An Expert’s Guide to EV Load Management and NEC Compliance Smart EV charging control architectures…
Frequent power failures due to severe storms, aging grid infrastructure, and other unpredictable natural disasters…